AC Servo Motor Drive AD2G-0290-0000
Motors & Drives > AC Servo Motors & Drives

AC Servo Motor Drive AD2G-0290-0000

Availability: In Stock
$5,770.31

Rated current up to 29 Amp, 3 phase 220V ±10%

This type of servo drives has been installed on thousands CNC machines. It is one of the most reliable servo drives suitable for your machine tools or any of your factory automation equipments. The drive accepts +/-10V analog command, or digital command (see spec below).

All our drives come with one-year limited warranty, and additional warranty up to five years is optional.
Part Number AD2G-0290-0000
Rated current I [A] I5 <= 29
Main power supply 3-phase AC 220V ±10V 50/60Hz
Timing ratio 5000:1
Speed fluctuation rate Less than 0.01% of rated speed
Speed frequency response >= 300Hz
Working mode Velocity or position
Velocity command Analog voltage +-10V
Position command Pulse/direction, CCW/CW pulse, A/B orthogonally pulse
Maximum pulse frequency: 1MHz
Electronic gear of position command Command pulse multiplier: 1~32767;
command pulse divider: 1~32767
Orientation precision +/-0.005° (if 17bit absolute encoder);
+/-0.018° (if 5000-line incremental encoder).
Motor’s feedback Incremental encoder, or Absolute encoder
Digital Inputs Servo enable, alarm clear, inhibited, zero-speed clamped, etc.
Digital Outputs Servo ready, servo alarm, position/speed arrival, HOLD release, 0-speed, encoder zero-point, etc.
Protective function For overvoltage, under-voltage, over-current, overload, overheat, encoder overheat, over-speed, position out-of-tolerance, brake abnormal, motor overheat, etc.
Operation and display 5 push-buttons for parameter setting etc. 6-bit LED for displaying speed, position, position offset, motor’s torque, motor’s current, motor’s absolute position, I/O signal states, etc.

Installation Dimension [mm]: