CPAC-OtoBox-UCTN2-ECAT-008-M23 motion controller
Motion Controllers > GUC-ECAT Series Motion Controller

CPAC-OtoBox-UCTN2-ECAT-008-M23 motion controller

Availability: In Stock
$2,332.00

It is compatible with EtherCAT Technology, can synchronously control up to 64 axis

The GUC-ECAT series motion controller, which is compatible with EtherCAT Technology, can synchronously control up to 64 axes and supports standard IEC61131-3. Due to its high computation speed and supports large number of IOs, the controller is widely used in different demanding industries.

GUC-ECAT provides low cost solution to equipment manufacturer. Clients can select EtherCAT modules from different manufacturers to build different systems. With the help of development platform: OtoStudio, user can greatly reduce the development time due to its sufficient function libraries. By using GUC-ECAT controller, fewer cables are needed. It thus helps clients to eas wiring and reduces maintenance cost.

Order Includes:
  • Motion controller (CPAC-OtoBox-UCTN2-ECAT-008-M23) x1
  • PS/2 cable x1
  • CD x1
Features Description
Hardware Configuration
CPU Intel Atom Processor, 1.66GHz
Hard drive 4GB
RAM 2GB DDR3
Display VGA and eHMI*
USB USB 2.0 X2
Keyboard and mouse KB/MS 2 in 1 port
Network RJ45 X2 (10/100/1000Mbps self-adaptive)
RS 232 RS 232 X1
OS WinCE 6.0
Support protocol EtherCAT 1 X RJ45 100Mbps gLink 1DB9F 6.125Mbps
Function List
Maximum no. of control axis Up to 64 axes
Development environment OtoStudio**
Motion control function Point to Point motion, Jog motion, PT/PVT motion, Electronic gear/cam mode, Linear interpolation mode, Arc interpolation mode, Compensation algorithm
PLC function
  • IEC61131-3 control kernel
  • EtherCAT bus I/O module
  • gLink bus I/O module
Digital I/O 8 channels 24V high voltage active or 0V Low voltage active
Analog I/O 6 channels input, 2 channels output. Voltage range: ±10V Resolution: 12 bits
Encoder 2-channel Configurable incremental and absolute encoder (Can be used for synchronous control among multiple controllers)
General Features
Voltage 24VDC ± 10%
Current 3A (minimum)
Operating temperature 0-55°C
Humidity 5%-90%, no condensation
Dimension 296 X 160 X 77mm

*eHMI is a high speed and stable interface using for the communication between the controller and touch panel. The maximum length of the eHMI cable is 100M. Using RJ45 connector, user can easily make the cable with simple hand tool.

** The development platform OtoStudio is based on IEC61131-3 programming standard. User can use instruction list, ladder diagram, function block diagram, structure text and sequential function chart to do programming. For more details, please refer to the CPAC catalog or contact Googol Technology.